Search

Vaddio's 999-85820-000 EasyIP CeilingMIC D complements most interiors with its sleek design featuring smooth lines and quality acoustical fabric wrap. These overhead microphones are a great alternative to a custom installation or table microphones. Ceiling-mounted microphones create a clean look in your conference room or meeting space and eliminate table clutter. Vaddio's EasyIP CeilingMIC D is ideal for drop tile ceilings and open-ceiling environments as well.

With full 360-degree pickup coverage, one EasyIP CeilingMIC D provides excellent coverage for an average size meeting room table. Ensure clear coverage of all meeting participants in larger spaces with multiple ceiling microphones - the number of microphones is only limited by the availability of network switch ports. Centrally manage microphone routing and system configuration with free Dante Controller software.

Each EasyIP CeilingMIC D unit delivers the performance of three microphone elements built into a single pendant hanging enclosure. Each unidirectional cardioid microphone element is equipped with integrated echo cancellation and Digital Signal Processing (DSP), including equalization, filtering and automatic gain control (AGC). The DSP in the interface box receives its AEC reference from the far end and applies it to individual mic elements, so conference calls are crystal-clear on both ends of the conversation. Configure and fine-tune the DSP easily with Vaddio's desktop configuration tool.

With its plug-and-play design, installation is as simple as connecting a Cat-5e cable between the network switch PoE port and the EasyIP CeilingMIC D microphone receiver. Power, control and audio are all incorporated into the single cable.

The CeilingMIC pendant includes a 3 ft. (0.9 meters) adjustable drop cable and with a standard RJ45 jack connection, the pendant can be extended to a total length of 15 ft. (4.6 meters) from the interface box.

Features:

• MADE IN THE USA!
• Dante networked audio signal for easy system routing
• Three-element array head for 360-degree coverage
• Design allows for custom ceiling drop cable length and easy installation
• Built-in digital signal processor (DSP)

Specifications:

• Frequency Response: 100 Hz to 16 KHz
• THD + Noise: < 0.02%
• Dynamic Range: >90 dB
• Operating/Storage Temperature: 32°F to 104°F (0°C to 40°C)
• Operating/Storage Humidity: 10% to 80% (non-condensing)
• Maximum Cabling Distance Drop cAble: 15 ft (4.6 m)
• Interface Box To Host Device: 328 ft (100 m)
• Interface Box Dimensions: Length including flange: 10.25 in x 4.6 in x 2 in.
• Microphone body Dimensions: 2.5 in. (6.3 cm)

Item Includes:

• 1x EasyIP CeilingMIC D microphone pendant and interface box
• 1x Quick Start Guide
• 1x 3 ft. (0.9 m) White or Black Cat5e Cable
• 1x Ceiling Mounting Hardware

Warranty:

• 3 years

The Galil 8−C Closed−back Ceiling Speaker features a multi−tap power transformer for selecting 8Ω (bypassing the transformer) or 70V/100V power settings that are suitable for an array installation.

• Type — 2–way coaxial speaker.
• Woofer — 8” polypropylene cone.
• Tweeter — 1” silk dome.
• Impedance — 8Ω.
• Power Handling — 64W RMS, 180W continuous program.
• Transformer Taps — 70V: 64W/32W/16W/8W/4W/Off (Lo–Z); 100V: 64W/32W/16W/8W/Off (Lo–Z).
• UL 1480 & 2043 Listed
• Package Includes — 2 speakers (1 pair), ceiling mounting kit, template and user manual.

The Galil 6−C Closed−back Ceiling Speaker features a multi−tap power transformer for selecting 8Ω (bypassing the transformer) or 70V/100V power settings that are suitable for an array installation.

• Type — 2–way coaxial speaker.
• Woofer — 6.5” polypropylene cone.
• Tweeter — 0.5” Mylar dome.
• Impedance — 8Ω.
• Power Handling — 30W RMS, 80W continuous program.
• Transformer Taps — 70V: 30W/15W/7.5W/3.7W/Off (Lo–Z); 100V: 30W/15W/7.5W/Off (Lo–Z).
• UL 1480 & 2043 Listed
• Package Includes — 2 speakers (1 pair), ceiling mounting kit, template and user manual.

The Galil 2−C is a 2.5” full−range closed−back speaker with ceramic terminals and a plastic self−extinguishing back−can. It is especially designed to meet the requirements of fire alarm systems in public spaces and is EN 54−24 certified.

• Type — Closed–back ceiling speaker.
• Woofer — 2.5” paper cone.
• Impedance — 8Ω (transformer tap in off position).
• Power Handling — 10W RMS, 30W continuous program.
• Transformer Taps — 70V — 3W/1.5W/0.75W/8Ω/10W/Off (Lo–Z); 100V — 6W/3W/1.5W/8Ω/10W, Off (Lo–Z).
• Packaging — These are priced individually and can be sold individually. (Full carton size is 18 speakers)

The Galil 6−CO is a pair of two−way open−back 8Ω speakers designed for mounting in the ceiling. The speakers feature a multi−tap power transformer for selecting direct 8Ω (bypassing the transformer) or 70V/100V power settings suitable for distributed installation.

• Type — 2–way coaxial round open–back ceiling speaker with infinite baffle design.
• Woofer — 6.5" polypropylene cone with rubber surround.
• Tweeter — 0.5" Mylar.
• Frequency Response — 60Hz to 20kHz.
• Impedance — 8Ω.
• Sensitivity — (SPL) 87dB (1W @1m with 1kHz).
• Recommended Power — RMS 30W, 80W max.
• Grill — White baffle aluminum grills.
• Package — 2 speakers (1 pair), template and user manual.

The Galil 8−CO is a pair of two−way, open−back, 8Ω speakers designed for mounting in the ceiling. The speakers feature a multi−tap power transformer for selecting 8Ω or 70V/100V power settings suitable for array installation.

• Type — 2–way coaxial speaker.
• Woofer — 8” polypropylene cone.
• Tweeter — 1” silk dome.
• Frequency Response — 60Hz to 20kHz @ ±3dB.
• Impedance — 8Ω.
• Power Handling — 50W RMS, 140W continuous program.
• Transformer Taps — 70V: 50W/25W/12W/6W/Off (Lo–Z); 100V: 50W/25W/12W/Off (Lo–Z).
• Package Includes — 2 speakers (1 pair), cutout template and user manual.
• Mounting Bracket (Optional) — SKIC–8.

The Galil 4−CO is a pair of two−way, open−back, 8Ω speakers designed for mounting in the ceiling. The speakers feature a multi−tap power transformer for selecting 8Ω or 70V/100V power settings suitable for array installation.

• Type — 2–way coaxial speaker.
• Woofer — 4" polypropylene cone.
• Tweeter — 0.5” Mylar dome.
• Frequency Response — 80Hz to 20kHz@ ±3dB.
• Impedance — 8Ω.
• Power Handling — 15W RMS, 40W continuous program.
• Transformer Taps — 70V: 15W/7.5W/3.7W/Off (Lo–Z); 100V: 15W/7.5W/Off (Lo–Z).
• Package Includes — 2 speakers (1 pair), cutout template and user manual.

The Galil 4−C Closed−back Compact Ceiling Speaker features a multi−tap power transformer for selecting 8Ω (bypassing the transformer) or 70V/100V power settings that are suitable for an array installation. The Galil 4−CO open−back version is also available.

• Type — 2–way coaxial speaker.
• Woofer — 4” polypropylene cone.
• Tweeter — 0.5” Mylar dome.
• Impedance — 8Ω.
• Power Handling — 30W RMS, 80W continuous program.
• Transformer Taps — 70V: 30W/15W/7.5W/3.7W/Off (Lo–Z); 100V: 30W/15W/7.5W/Off (Lo–Z).
• UL 1480 & 2043 Listed
• Package Includes — 2 speakers (1 pair), ceiling mounting kit, template and user manual.
• Installation Dimensions — External diameter: 19.5cm (7.68"); cutout diameter: 16.7cm (6.57")

Model JG-8X steel grille with beveled edges and white finish includes a separate sub-plate that direct-mounts an 8-inch speaker and enclosure. The direct-mount method allows a high quality 8-inch speaker with a substantial motor structure weight to be supported by the enclosure instead of the grille.

Specifications

• Style:  Screw-mount
• Material:  20-gauge beveled frame with radius corner cutout and welded 22-gauge perforated steel screen, 21-gauge steel subplate
• Finish:  White grille, black subplate
• Size:  12.375 in. square
• Mounting Projection:  0.375 in.
• Mounting Provisions:  4 screws (white), subplate w/4 screws

Certification and Compliance

• Made in the U.S.A.
• Certified U.S. steel

A&E Specifications

The JG-8X square speaker grille for the 8 inch driver shall be Lowell Model JG-8X. It shall be 20-gauge steel frame with a beveled edge, radius corner cutout and 22-gauge welded perforated screen center. The grille shall include a 21-gauge steel subplate and mounting hardware. The grille shall be 12.375 in. square with a mounting projection of 0.375 in. The subplate shall include provisions for mounting an 8 in. driver and for mounting the speaker/adapter assembly to specified recessed or surface backbox. The subplate shall be finished in black powder epoxy. The grille shall be finished in white powder epoxy and shall mount to the specified backbox using four 8-32 x .375 in. white screws.

Specifications

• Style:  Screw-mount
• Material:  Precision formed single piece of 20-gauge steel reinforced with 60-degree peripheral flange, perforated center, contoured edge
• Finish:  White
• Size:  12.875 in. diameter
• Mounting Projection:  0.25 in. mounting projection
• Mounting Provisions:  4 screws (white), welded studs w/nuts

Certification and Compliance

• Made in the U.S.A.
• Certified U.S. steel

A&E Specifications

The contoured speaker grille for 8 inch speakers shall be Lowell Model WB-8. It shall be fabricated one-piece 20-gauge steel reinforced with a peripheral flange of 60-degrees. The grille diameter shall be 12.875 inch with a shallow mounting projection of 0.25 in. Each grille shall have four 0.25 in. holes spaced at 90-degree intervals on an 11.25 in. bolt circle for mounting grille to specified backbox or mounting ring. It shall be finished in white powder epoxy coating and include white screws for backbox mounting and welded studs for mounting specified 8 in. speaker.

15W paging horn or double re-entrant horn with high efficiency 15W compression driver for clear voice paging and tone signaling in indoor or outdoor applications is ideal for use where a weather-resistant horn is specified for public address/signaling applications that require high intelligibility (e.g. schools, recreational facilities, warehouses, distribution centers, parking facilities, commercial buildings).

Assembly Includes

• Driver:  15W compression
• Transformer:  For 25V, 70V or 100V systems. Screwdriver-adjustable tap selector and screw terminal connections in rear. Integral strain relief and plastic cover.
• Housing:  Weather-resistant assembly suitable for indoor or outdoor use is all-metal construction with durable beige epoxy finish. Two-wire hook-up to rear access screw terminals. 8.94 in. diameter x 9.38 in. deep.
• Mounting Aids:  Universal swivel mounting bracket (2.875 in. dia. base)
• Operating Temperature Range: -40 to 158 degrees F
• Average Sensitivity (1W/1M): 112.2dB
• Ships ready for installation

Compliance and Certification

• RoHS
• IP66 rated (IEC 60529) for water/dust-resistance when optional wiring compartment cover is added (see Related Products tab)

A&E Specifications

The horn shall be Lowell Model LH-15TA, which shall be a double reentrant design with a high efficiency 15W compression driver, round bell and universal swivel-style base. Power rating shall be 15 watts continuous. Frequency response shall be 537Hz-4.5kHz (±6dB) with a sensitivity of 112.2dB log average (1W/1M) 124.0dB maximum SPL (calculated based on power rating and measured sensitivity). Dispersion shall be 50 degrees conical (2kHz Octave Band). Impedance shall be 5000, 2500, 1300, 670, 330, 90, 45 ohms. Horn shall include a 25/70/100V transformer with screwdriver selectable taps. Taps for 25V use shall be: .13, .25, .48, .93, 1.9, 6.9, and 13.9W. Taps for 70V use shall be: 1, 2, 3.8, 7.5, and 15W. Taps for 100V use shall be: 2, 4, 7.7 and 15W. Transformer connections shall be protected by a plastic cover with strain relief. The horn assembly shall measure 8.94 in. dia. x 9.38 in. deep and shall be weather-resistant metal construction painted in corrosion-resistant beige epoxy.

Speaker baffle model DSL-8 with beveled edges and sloped front is made for use with an 8-inch driver. Steel with white powder epoxy finish baffle features knockouts for 500 Series wiremold on top and bottom, and has a universal mounting hole pattern in the rear.

Features

• Material:  Steel with beveled edge and sloped front
• Grille:  Square with circular perforation pattern
• Finish:  White
• Size:  11.3 in.H  x 11.5 in.W x 5.29 in.D at top (3.05 in. at bottom)
• Volume: 541.9 cu.in.
• Mounting Aids:  Knockouts for 500 Series wiremold on top/bottom and universal mounting hole pattern in rear
• Certified U.S. steel
• Made in Missouri, U.S.A.

Features

• Driver:  8 in. 15W dual cone driver with 10 oz. ceramic magnet, hard fiber whizzer cone and 1 in. voice coil.
• Frame:   20-gauge stamped steel with zinc-plated finish.
• Mounting Bolt Circle:  7.625 in.
• Transformer:  25/70V with taps at 0.25, .5, 1, 2, 5W
• Assembly Frequency Response:  51Hz-11.6kHz (±6dB) and 50Hz- 20kHz (±6.4dB)
• Assembly Mounting Depth:  2.84 in.
• Assembly Dispersion Angle:  95 degrees conical
• Assembly Average Sensitivity:  97.9dB

Compliance and Certifications

• Made in U.S.A. with global components
• Meets or exceeds industry standards

A&E Specifications

The dual cone 8-inch speaker shall be Lowell Model No. 810-T72 which shall be of the permanent magnet type having a seamless molded fiber cone with a hard fiber whizzer cone mechanically coupled to a voice coil for extended high frequency response. Power rating shall be 15 watts RMS. The voice coil shall have a 1-in. dia. and shall operate in a magnetic field derived from a strontium ferrite ceramic magnet having a nominal weight of 10 oz. Voice coil impedance shall be 8ohms. The driver shall have a round, structurally reinforced stamped 20-ga. steel frame with 8.062" overall diameter and eight obround holes equally spaced at 45 degrees on a 7.625" dia. mounting bolt circle. Overall depth shall not exceed 2.84". External metal parts shall be zinc-plated to resist rust and corrosion. The mounted transformer shall be 70/25V dual voltage with selectable taps at .25, .5, 1, 2, and 5W. The assembly shall be capable of producing a uniform audible frequency response over the range of 51Hz-11.6kHz ( 6dB), 50Hz- 20kHz ( 6.4dB) with dispersion angle of 95 degrees conical @2000Hz (-6dB). Average sensitivity shall measure 97.9dB (SPL at 1W/1M).

Description

The first battery-powered loudspeaker from Electro-Voice and the first weatherized model of its type, EVERSE 8 takes advantage of decades of Electro-Voice engineering expertise – along with the latest advancements in technology – to provide a truly portable and truly wireless audio experience at a price and performance level unmatched by current comparable products on the market.

Whether used for live music, vocal reinforcement and/or audio playback, musicians, DJs, production/rental companies, fitness/activity instructors and other professional, amateur and recreational users can all benefit from EVERSE 8’s superior sound quality, user-friendliness and all-in-one PA system design – a concept that opens-up real pro-audio performance for a wider range of users than ever before. EVERSE 8 comes in a black or white finish, adding an aesthetic angle to its versatility.

Features

• Designed to deliver a step up in sound quality for the battery-powered portable PA segment, with high SPL and full-bandwidth coverage
• Compact, lightweight and weatherized design coupled with extended battery life – longer run time for gigs and events, indoors or outdoors
• Flexible all-in-one feature set, including QuickSmart Mobile app and Bluetooth® for best-in-class control and streaming, an onboard mixer and studio-quality effects – a user-friendly and versatile choice for musicians, DJs, fitness/activity instructors, events/gatherings and more

Real Pro-Audio Performance

With a maximum SPL rating of 121 dB and wide, even 100º x 100º coverage, EVERSE 8’s capabilities defy its compact form factor and set uncompromising new benchmarks for its product segment. Core components include an 8” woofer mounted using EV’s patented SST (Signal Synchronized Transducers) port design, and a high-output titanium tweeter mounted onto a custom constant-directivity waveguide. And, as with all Electro-Voice portable loudspeakers, EVERSE 8’s system reliability is verified with extensive music abuse and endurance testing.

Battery-Powered Convenience

EVERSE 8 is powered by a custom-designed high-capacity Li-ion battery pack, fully optimized for audio use and providing plentiful power for up to 12 hours of run time. Protection circuitry reduces the risk of the battery discharging to such a low voltage that it can no longer be recharged – for example, after long periods in storage. Tool-free screws make removing the battery pack effortless. Uncompromising sound quality, unplugged.

IP43-Rated Weatherized Design

In combination with the rugged polypropylene enclosure, use of the included weatherized input cover allows EVERSE 8 to meet the IP43 rating (water resistant for splashes and light rain) when running on battery power and while Bluetooth® streaming. Built-in feet with no-skid rubber pads ensure the system stays put. Bring EVERSE 8 outside for busking, marching band practice, or the backyard BBQ, or wherever a PA is needed, whatever the forecast.

Compact & Lightweight

Every detail of EVERSE 8 is designed to maximize easy lifting and transportation – all while reinforcing EV’s reputation for real-world durability. An ergonomically designed soft-touch handle and premium lightweight construction make it a breeze to move and mount EVERSE 8. Pack it into the optional tote bag and head out to the gig. It’s the all-in-one pro-audio system you can grab to go.

Expandable Functionality

The integrated 12 V DC port provides convenient power from the EVERSE 8 battery, perfect for powering a wireless microphone system such as the Electro-Voice RE3 or R300 (see user manual for details). Attach the optional accessory tray to the top of an EVERSE 8 to secure receiver hardware in place. A charging port is included for mobile devices if a top-up is needed when streaming. Place on a tripod for a longer throw, set long-side down as a stage wedge using the 55° monitor angle, or use upright with the 30° kick-back angle to project up off the performance area. For stereo setups, EVERSE 8 is equipped for Bluetooth® true wireless stereo streaming.

Powered by Dynacord

EVERSE 8 is driven by a high-efficiency Class-D amplifier and DSP module developed in collaboration with the world-class audio electronics engineering team at EV’s sibling brand Dynacord. Pro features include a built in four-channel digital mixer with studio-quality effects and processing, 48 V phantom power, feedback suppression and audio ducking. Between the EV and the D badges, you get the best of both worlds.

Wireless Control & Monitoring

Use the EV QuickSmart Mobile app to adjust all audio, effects and mix functions via your phone or tablet. An intuitive user interface makes it simple to shape your sound to the space, so you can focus on the show.

The Yarden 8−T High−Performance Ceiling Tile Stereo Speaker features a Kevlar(R) woofer, four pivoting titanium tweeters, complete K−overage ESD™ (Equal Sound Dispersion) design for almost 180 degrees of sound dispersion. It features speech mode to improve intelligibility, music mode for an extra wide frequency response and stereo and mono modes to fit any kind of installation. It also features a magnetically held grill (with two security screws) for time saving installation, 2nd level cross−over design and multi−tap power transformer for selecting 8Ω (bypassing the transformer) or 70V/100V power settings that are suitable for an array installation.

• Type — 2–way ceiling tile speaker.
• Woofer — 8” Kevlar(R) cone.
• Tweeters — Four pivoting 0.75” titanium domes.
• Impedance — Stereo 8Ω, mono 4Ω.
• Stereo/Mono Selector Switch.
• Speech/Music Selector Switch.
• Power Handling — 2 x 40W RMS, 2 x 110W continuous program.
• Transformer Taps — Stereo: 70V: 2 x 30W/15W/7.5W/3.7W, 100V: 2 x 30W/15W/7.5W; Mono: 70V: 60W/30W/15W/7.5W, 100V: 60W/30W/15W.
• UL Certification — UL 1480 & 2043 listed and plenum compliant.
• Package — 1 speaker.

The Tavor 8−T High Performance Powered Ceiling Tile Speaker features a 40 watt built−in class D power amplifier, three inputs, Kevlar(R) woofer, four pivoting titanium tweeters, complete K−overage ESD™ (Equal Sound Dispersion) design for almost 180 degrees of sound dispersion, magnet held grill (with two security screws) for time saving installation, and a 2nd−level cross−over.

• Type — 2–way ceiling tile speaker.
• Built–in Power Amplifier — 40W RMS, 110W continuous program.
• Woofer — 8” Kevlar(R) cone.
• Tweeter — Four pivoting 1” titanium domes.
• 3 Inputs with Individual Volume Control.
• Master Volume Control.
• Package — 1 Speaker.

Quick-install speaker system for suspended tile ceilings features an 8-inch dual cone driver with dual voltage (25V/70V) transformer, 2x2 fine perforation grille with sub-plate and enclosure. For commercial paging and background music.

Includes

• Driver (810):  8 in. 15W dual cone driver with 10 oz. magnet, frequency response of 54Hz-11.6kHz (±6dB) and 50Hz-20kHz (±6.6dB), and average sensitivity of 97.9dB measured 1W/1M. Conical dispersion 95 degrees.
• Transformer:  Dual voltage 25V/70V transfomer with taps at .25, .5, 1, 2, 5W
• Grille with Subplate (2×2):  Fine-perforation grille provides maximum free-air space for excellent sound transmission while maintaining an unobtrusive appearance in new or existing tile ceilings. White.
• Enclosure (8XD4):  .147 cu.ft. steel with speaker leads that exit through a metal clamp for fast connection. Black.
• Mounting Aids:  Restraint tabs.

A&E Specifications

The 2×2 ceiling tile speaker shall be Lowell Model No. LT2-810-72-BB. The 2’x2′ system shall directly replace a 2’x2′ ceiling tile. Each speaker system shall include a factory-mounted driver mounted to a subplate with a fine perforation steel grille finished in white powder epoxy. The driver shall be 8 inch dual cone with a power rating of 15W. It shall have a magnet weight of 10 ozs., frequency response of 54Hz-11.6kHz (±6dB) and 50Hz-20kHz (±6.6dB), and average sensitivity of 97.9dB measured 1W/1M. The system shall include a steel backbox (.147 cu.ft.) with leads exiting through a metal clamp. The dual voltage transformer (25V/70V) shall feature primary taps at .25, .5, 1, 2 and 5W.